Threading Tap Sets

What are tap sets?


Used to cut a thread into a piece of material, taps are used similarly to a drill bit but rather than removing material to create a hole, a tap removes material for an existing holes walls to create a screw or bolt thread. Taps can be used with a tap wrench or with a power tool such as a drill. Forming taps by hand with a tap wrench or T wrench gives you the ability to slowly form the thread ensuring it cuts evenly and smoothly for the best finish. Working with power tools to cut threads can be faster for mass produced work but care must be taken to ensure the thread is cut correctly.


Different types of taps


Taper taps are used to start new threads in materials that have not previously been cut. This gradual tapered cut allows for a smooth start to a new thread. These are commonly used in tougher materials like alloy steel to create less strain on the tap as well as on smaller diameter holes with thinner taps that are more prone to breaking whilst cutting.


Second taps, also known as plug or intermediate taps are used similarly to the taper tap, working to create a fresh new thread in material often not having previously been cut. Second taps have a shorter taper but more threads along the cutting length to create more thread, faster. Second taps are one of the most commonly used taps as they can cut fresh threads in material whilst also re-cutting threads in slightly worn or older crossed threads.


Bottom taps, unlike taper and second taps, are a straight, continuous cutting edge with no taper, meaning threads are cut as soon as the tap enters the hole. The full cutting body allows for threads to be cut right down to the bottom of a blind hole. Blind hole tapping is when a thread is cut into a hole that does not pass fully through a piece of material. The bottom tap is typically only used when an existing thread has been cut either with a taper or second tap or when re-cutting an old thread that may have worn or been cross threaded.



...
顯示內容 隱藏內容

篩選條件

正在檢視 21 - 40,共 94 項產品
Results per page
Description Price Set Type Maximum Tap Size Minimum Tap Size Number of Pieces Material Set Contents
RS庫存編號 151-909
BrandRS PRO
TWD203.00
整套:1 個
Set(s)
Straight Flute Tap #4 BA #4 BA 2 HSS Taper Tap and Plug Tap
RS庫存編號 152-429
BrandRS PRO
TWD293.00
整套:1 個
Set(s)
Straight Flute Tap 5/16 in UNC 5/16 in UNC 2 HSS Taper Tap and Plug Tap
RS庫存編號 152-413
BrandRS PRO
TWD1,167.00
整套:1 個
Set(s)
Straight Flute Tap M25 M25 2 HSS Taper Tap and Plug Tap
RS庫存編號 508-8926
製造零件編號01527
BrandEXACT
TWD554.00
單位
Hand Tap #10 UNF #10 UNF 2 HSS Taper Tap and Second Tap
RS庫存編號 340-6546
BrandRS PRO
TWD1,391.00
整套:1 個
Set(s)
Spiral Point Tap M12 M3 7 HSS Second Taps: M3; M4; M5; M6; M8; M10; M12
RS庫存編號 152-372
BrandRS PRO
TWD636.00
整套:1 個
Set(s)
Straight Flute Tap M20 M20 2 HSS Taper Tap and Plug Tap
RS庫存編號 241-4271
製造零件編號E515 NO.6 X 32 SET
BrandDormer
TWD809.00
整套:1 個
Set(s)
Straight Flute Tap #6 UNC #6 UNC 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 151-921
BrandRS PRO
TWD164.00
整套:1 個
Set(s)
Straight Flute Tap M2.5 M2.5 2 HSS Taper Tap and Plug Tap
RS庫存編號 215-530
BrandRS PRO
TWD252.00
單位
Hand Tap M6 M6 3 HSS Taper Tap; Plug Tap and Bottom Tap
RS庫存編號 152-356
BrandRS PRO
TWD219.00
整套:1 個
Set(s)
Straight Flute Tap #6 UNC #6 UNC 2 HSS Taper Tap and Plug Tap
RS庫存編號 152-479
BrandRS PRO
TWD192.00
整套:1 個
Set(s)
Straight Flute Tap M5 M5 2 HSS Taper Tap and Plug Tap
RS庫存編號 340-6552
BrandRS PRO
TWD1,740.00
整套:1 個
Set(s)
Spiral Point Tap M12 M3 7 HSS Second Taps: M3; M4; M5; M6; M8; M10; M12
RS庫存編號 241-4114
製造零件編號E500 10.0 X 1.50 3FL SET3
BrandDormer
TWD1,166.00
整套:1 個
Set(s)
Straight Flute Tap M10 M10 3 HSS Taper Tap; Plug Tap and Bottom Tap
RS庫存編號 509-0266
製造零件編號10004
BrandEVENTUS
TWD223.00
單位
Hand Tap M3 M3 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 241-4029
製造零件編號E500 2.5 X 0.45 3FL SET3
BrandDormer
TWD1,166.00
整套:1 個
Set(s)
Straight Flute Tap M2.5 M2.5 3 HSS Taper Tap; Plug Tap and Bottom Tap
RS庫存編號 152-186
BrandRS PRO
TWD225.00
整套:1 個
Set(s)
Straight Flute Tap 3/8 in UNC 3/8 in UNC 2 HSS Taper Tap and Plug Tap
RS庫存編號 152-435
BrandRS PRO
TWD444.00
整套:1 個
Set(s)
Straight Flute Tap M16 M16 2 HSS Taper Tap and Plug Tap
RS庫存編號 152-176
BrandRS PRO
TWD422.00
整套:1 個
Set(s)
Straight Flute Tap 1/4 in BSP 1/4 in BSP 2 HSS Taper Tap and Plug Tap
RS庫存編號 171-2460
製造零件編號K-437-3
BrandHozan
TWD209.00
單位
Drilling Tool Tap Set M3 - 3 - Bottom Tap, Plug Tap, Taper Tap
RS庫存編號 152-132
BrandRS PRO
TWD680.00
整套:1 個
Set(s)
Straight Flute Tap 3/8 in BSW 3/8 in BSW 2 HSS Taper Tap and Plug Tap