Counter ICs

A Shift Register is a sequential logic device made up of a cascade of flip-flops, through which a sequence of bits are ’shifted’. These devices are commonly used to convert between serial and parallel interfaces.

How it works – basic example

In a Shift Register the output of each flip-flop is connected to the input of the next flip-flop in the cascade. With each cycle of the connected clock, the bits are ’shifted’ down the cascade by one flip-flop.

A simple analogy to understand the basic theory or operation would be to consider a glass tube with an opening both ends, and placing a ball marked ’0’ or ’1’ into one end of the tube at a regular intervals.

As each ball is placed into the tube, all the balls are ’shifted’ along by one position. The sequence in which the balls marked ’0’ and ’1’ where fed in is preserved. Also each time one ball is fed in, the ball that has been in the cascade the longest drops out. So if the tube can contain 4 balls at any one time, this could be described as a 4-bit Shift Register.

Common Types of Shift Register

• Serial-in serial-out (SISO) – In this type of Shift Register, the data input and output is serial. With each clock cycle a new bit is fed into the cascade, with the bit furthest along the cascade exiting as an output. So in a 4-bit register, the output trails the input by 4 clock cycles. This matches the simple example above, with the ball that exits the tube being the output.

• Serial-in parallel-out (SIPO) – In this configuration data is converted from serial into parallel format. As described for the SISO variant above, data is fed in serially and shifted down the cascade, the difference is that each flip-flop has an output, allowing the entire bit array to be output simultaneously as a parallel output. This may be done using a latched of buffered output.

• Parallel-in serial-out (PISO) – This variant takes a parallel input and converts into a serial output. To do this the shift register must implement a write/shift sequence. The parallel data input is (written) into each flip-flop of the array simultaneously in one clock cycle, then for the next cycles the register goes into shift mode as the bits are shifted down the flip-flop cascade, being output as serial data. The process then repeats.

• Parallel-in parallel-out (PIPO) – This type of register differs slightly from the others in that inputs and outputs of each flip-flop in the array are not interconnected. Each flip-flop takes one bit of the parallel input, stores it for a cycle, and then outputs the data simultaneously with the other flip-flops in the register, creating a parallel output that matches the input. Like the SISO type above, PIPO variants can be used to temporarily store data, or act a time delay device.

• Universal Shift Register – A configurable Shift Register that can be programmed to act as a SISO, SIPO, PISO or PIPO device, often on the fly.

...
顯示內容 隱藏內容

篩選條件

正在檢視 81 - 100,共 709 項產品
Results per page
Description Price Package Type Logic Function Number of Stages Logic Family Mounting Type Counter Type Operation Mode Number of Elements Pin Count Minimum Operating Supply Voltage Maximum Operating Supply Voltage Dimensions Length Width
RS庫存編號 807-2359
製造零件編號CD4040BM
TWD13.80
/個 (每包:40個)
單位
CDIP Counter 12 4000 Through Hole Binary Up Counter 1 16 1 V 15 V 19.94 x 7.87 x 3.56mm 19.94mm 7.87mm
RS庫存編號 528-022
製造零件編號CD74HC4094E
TWD14.10
毎管:25 個
單位
PDIP Shift Register 8 HC Through Hole - Serial to Serial/Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 145-0003
製造零件編號CD4516BEE4
TWD7.20
毎管:25 個
單位
PDIP Counter 4 4000 Through Hole Binary Down Counter, Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 796-7963
製造零件編號CD74HC166M
TWD17.90
/個 (每包:10個)
單位
SOIC Shift Register 8 74HC Surface Mount - Parallel to Serial, Serial 1 16 2 V 6 V 10 x 4 x 1.5mm 10mm 4mm
RS庫存編號 145-6214
製造零件編號CD74HC166M
TWD9.60
毎管:40 個
單位
SOIC Shift Register 8 74HC Surface Mount - Parallel to Serial, Serial 1 16 2 V 6 V 10 x 4 x 1.5mm 10mm 4mm
RS庫存編號 791-8753
製造零件編號74HC595BQ,115
BrandNexperia
TWD5.30
/個 (每包:50個)
單位
VQFN Shift Register 8 HC Surface Mount - Serial to Serial/Parallel 1 16 2 V 6 V 3.6 x 2.6 x 0.95mm 3.6mm 2.6mm
RS庫存編號 178-4723
製造零件編號MC14094BDG
TWD10.50
毎管:48 個
單位
SOIC Shift Register 8 4000 Surface Mount - Serial to Serial/Parallel 1 16 3 V 18 V 10 x 4 x 1.5mm 10mm 4mm
RS庫存編號 663-0095
製造零件編號CD74HC164E
TWD11.50
/個 (每包:10個)
單位
PDIP Shift Register 8 HC Through Hole - Serial to Parallel 1 14 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 368-7874
製造零件編號HEF4094BT,652
BrandNexperia
TWD11.00
毎管:50 個
單位
SOIC Shift Register 8 4000 Surface Mount - Serial to Serial/Parallel 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 662-9590
製造零件編號CD4026BE
TWD13.00
/個 (每包:10個)
單位
PDIP Counter, Divider 5 4000 Through Hole Decade Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 483-6695
製造零件編號74HCT165D,652
BrandNexperia
TWD12.50
/個 (每包:10個)
單位
SOIC Shift Register 8 HCT Surface Mount - Serial to Serial/Parallel 1 16 4.5 V 5.5 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 145-0070
製造零件編號SN74HC165D
TWD6.20
毎管:40 個
單位
SOIC Shift Register 8 HC Surface Mount - Serial to Serial/Parallel 1 16 2 V 6 V 9.9 x 3.91 x 1.58mm 9.9mm 3.91mm
RS庫存編號 169-8580
製造零件編號MM74HC595MTCX
TWD4.90
個 (在毎卷:2500)
單位
TSSOP Shift Register 8 74HC Surface Mount - Serial to Parallel 1 16 2 V 6 V 5 x 4.4 x 0.9mm 5mm 4.4mm
RS庫存編號 807-2624
製造零件編號SN74AHCT595N
TWD12.00
/個 (每包:25個)
單位
PDIP Shift Register 8 74AHCT Through Hole - Serial to Parallel 1 16 4.5 V 5.5 V 19.69 x 6.6 x 4.57mm 19.69mm 6.6mm
RS庫存編號 162-4296
製造零件編號SN74LS592N
TWD318.50
毎管:25 個
單位
PDIP Counter 8 LS Through Hole Binary Up Counter 1 16 4.75 V 5.25 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 168-9619
製造零件編號HEF4017BT,652
BrandNexperia
TWD9.20
毎管:50 個
單位
SOIC Counter, Divider 5 4000 Surface Mount Decade Up Counter 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 144-9945
製造零件編號CD74HC164E
TWD10.60
毎管:25 個
單位
PDIP Shift Register 8 HC Through Hole - Serial to Parallel 1 14 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 177-6708
製造零件編號74HC4060D,652
BrandNexperia
TWD12.00
單位
SOIC Counter 14 HC Surface Mount Binary Up Counter 1 16 2 V 6 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 637-911
製造零件編號SN74LS592N
TWD381.00
單位
PDIP Counter 8 LS Through Hole Binary Up Counter 1 16 4.75 V 5.25 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 144-9939
製造零件編號CD4520BEE4
TWD7.00
毎管:25 個
單位
PDIP Counter 4 4000 Through Hole Binary Up Counter 2 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm