Counter ICs

A Shift Register is a sequential logic device made up of a cascade of flip-flops, through which a sequence of bits are ’shifted’. These devices are commonly used to convert between serial and parallel interfaces.

How it works – basic example

In a Shift Register the output of each flip-flop is connected to the input of the next flip-flop in the cascade. With each cycle of the connected clock, the bits are ’shifted’ down the cascade by one flip-flop.

A simple analogy to understand the basic theory or operation would be to consider a glass tube with an opening both ends, and placing a ball marked ’0’ or ’1’ into one end of the tube at a regular intervals.

As each ball is placed into the tube, all the balls are ’shifted’ along by one position. The sequence in which the balls marked ’0’ and ’1’ where fed in is preserved. Also each time one ball is fed in, the ball that has been in the cascade the longest drops out. So if the tube can contain 4 balls at any one time, this could be described as a 4-bit Shift Register.

Common Types of Shift Register

• Serial-in serial-out (SISO) – In this type of Shift Register, the data input and output is serial. With each clock cycle a new bit is fed into the cascade, with the bit furthest along the cascade exiting as an output. So in a 4-bit register, the output trails the input by 4 clock cycles. This matches the simple example above, with the ball that exits the tube being the output.

• Serial-in parallel-out (SIPO) – In this configuration data is converted from serial into parallel format. As described for the SISO variant above, data is fed in serially and shifted down the cascade, the difference is that each flip-flop has an output, allowing the entire bit array to be output simultaneously as a parallel output. This may be done using a latched of buffered output.

• Parallel-in serial-out (PISO) – This variant takes a parallel input and converts into a serial output. To do this the shift register must implement a write/shift sequence. The parallel data input is (written) into each flip-flop of the array simultaneously in one clock cycle, then for the next cycles the register goes into shift mode as the bits are shifted down the flip-flop cascade, being output as serial data. The process then repeats.

• Parallel-in parallel-out (PIPO) – This type of register differs slightly from the others in that inputs and outputs of each flip-flop in the array are not interconnected. Each flip-flop takes one bit of the parallel input, stores it for a cycle, and then outputs the data simultaneously with the other flip-flops in the register, creating a parallel output that matches the input. Like the SISO type above, PIPO variants can be used to temporarily store data, or act a time delay device.

• Universal Shift Register – A configurable Shift Register that can be programmed to act as a SISO, SIPO, PISO or PIPO device, often on the fly.

...
顯示內容 隱藏內容

篩選條件

正在檢視 61 - 80,共 669 項產品
Results per page
Description Price Package Type Logic Function Number of Stages Logic Family Mounting Type Counter Type Operation Mode Number of Elements Pin Count Minimum Operating Supply Voltage Maximum Operating Supply Voltage Dimensions Length Width
RS庫存編號 796-7947
製造零件編號CD4060BM
TWD12.30
/個 (每包:10個)
單位
SOIC Counter 14 CD4000 Surface Mount Binary Up Counter 1 16 3 V 15 V 10 x 4 x 1.5mm - -
RS庫存編號 145-6509
製造零件編號CD74HCT193E
TWD24.50
毎管:25 個
單位
PDIP Counter 4 HCT Through Hole Binary Down Counter, Up Counter 1 16 4.5 V 5.5 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 145-7381
製造零件編號SN74LV393AD
TWD33.70
毎管:50 個
單位
SOIC Counter, Divider 4 LV Surface Mount Binary Up Counter 2 14 2 V 5.5 V 8.65 x 3.91 x 1.58mm 8.65mm 3.91mm
RS庫存編號 709-2003
製造零件編號CD4015BE
TWD15.50
/個 (每包:10個)
單位
PDIP Shift Register 4 4000 Through Hole - Serial to Parallel 2 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 483-7890
製造零件編號HEF4017BT,652
BrandNexperia
TWD16.00
/個 (每包:20個)
單位
SOIC Counter, Divider 5 4000 Surface Mount Decade Up Counter 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 662-9540
製造零件編號CD40161BE
TWD19.20
/個 (每包:5個)
單位
PDIP Counter 4 4000 Through Hole Binary Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 145-1222
製造零件編號CD40192BE
TWD15.50
毎管:25 個
單位
PDIP Counter 4 4000 Through Hole Decade Down Counter, Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 178-6976
製造零件編號74HCT165D,652
BrandNexperia
TWD19.20
毎管:50 個
單位
SOIC Shift Register 8 HCT Surface Mount - Serial to Serial/Parallel 1 16 4.5 V 5.5 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 526-717
製造零件編號CD4094BE
TWD10.80
毎管:25 個
單位
PDIP Shift Register 8 4000 Through Hole - Serial to Serial/Parallel 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 145-0070
製造零件編號SN74HC165D
TWD15.00
毎管:40 個
單位
SOIC Shift Register 8 HC Surface Mount - Serial to Serial/Parallel 1 16 2 V 6 V 9.9 x 3.91 x 1.58mm 9.9mm 3.91mm
RS庫存編號 170-8015
製造零件編號74HCT165D,653
BrandNexperia
TWD7.30
個 (在毎卷:2500)
單位
SO Shift Register 8 74HCT Surface Mount - Serial/Parallel to Serial 1 16 4.5 V 5.5 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 518-9215
製造零件編號MC14094BDG
TWD16.00
單位
SOIC Shift Register 8 4000 Surface Mount - Serial to Serial/Parallel 1 16 3 V 18 V 10 x 4 x 1.5mm 10mm 4mm
RS庫存編號 368-7874
製造零件編號HEF4094BT,652
BrandNexperia
TWD11.90
毎管:50 個
單位
SOIC Shift Register 8 4000 Surface Mount - Serial to Serial/Parallel 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS庫存編號 145-0854
製造零件編號CD4020BE
TWD6.20
毎管:25 個
單位
PDIP Counter, Divider 14 4000 Through Hole Binary Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 443-104
製造零件編號SN74HC166N
TWD17.00
單位
PDIP Shift Register 8 HC Through Hole - Parallel to Serial, Serial 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 169-8580
製造零件編號MM74HC595MTCX
TWD5.40
個 (在毎卷:2500)
單位
TSSOP Shift Register 8 74HC Surface Mount - Serial to Parallel 1 16 2 V 6 V 5 x 4.4 x 0.9mm 5mm 4.4mm
RS庫存編號 333-2984
製造零件編號SN74HC166N
TWD13.60
毎管:25 個
單位
PDIP Shift Register 8 HC Through Hole - Serial to Serial/Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 528-022
製造零件編號CD74HC4094E
TWD16.60
毎管:25 個
單位
PDIP Shift Register 8 HC Through Hole - Serial to Serial/Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS庫存編號 761-3965
製造零件編號MM74HC595MTCX
TWD13.30
/個 (每包:10個)
單位
TSSOP Shift Register 8 74HC Surface Mount - Serial to Parallel 1 16 2 V 6 V 5 x 4.4 x 0.9mm 5mm 4.4mm
RS庫存編號 144-9945
製造零件編號CD74HC164E
TWD19.70
毎管:25 個
單位
PDIP Shift Register 8 HC Through Hole - Serial to Parallel 1 14 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm