Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.Grippers can be divided into 2 main categories by type of holding objects: External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object. Internal – When the access to objects exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object. What to consider when choosing the gripper: Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force. Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind. Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement. Environmental - Harsh environment or clean room applications require grippers designed for those purposes. Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
顯示內容 隱藏內容

篩選條件

正在檢視 1 - 20,共 47 項產品
Results per page
Description Price Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight
RS庫存編號 366-3604
製造零件編號MHZ2-16DN
BrandSMC
TWD12,301.00
單位
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g
RS庫存編號 768-1628
製造零件編號MHL2-20D
BrandSMC
TWD19,857.00
單位
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 1kg
RS庫存編號 182-5866
製造零件編號MHC2-20D
BrandSMC
TWD8,955.00
單位
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 180g
RS庫存編號 700-7314
製造零件編號MHS3-32D
BrandSMC
TWD15,693.00
單位
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 237g
RS庫存編號 700-7310
製造零件編號MHS3-25D
BrandSMC
TWD18,842.00
單位
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 140g
RS庫存編號 233-2113
製造零件編號MHL2-10D
BrandSMC
TWD14,629.00
單位
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 280g
RS庫存編號 182-5850
製造零件編號MHC2-16D
BrandSMC
TWD7,775.00
單位
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 91g
RS庫存編號 841-2329
製造零件編號MHZJ2-10DS
BrandSMC
TWD15,799.00
單位
MHZ Double 2 Parallel 0.2 → 0.7 MPa 0.7MPa Not Cushioned M3 x 0.5 60g
RS庫存編號 841-2331
製造零件編號MHZL2-16D
BrandSMC
TWD13,385.00
單位
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 135g
RS庫存編號 366-3610
製造零件編號MHZ2-20DN
BrandSMC
TWD14,174.00
單位
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g
RS庫存編號 700-7288
製造零件編號MHF2-16D1
BrandSMC
TWD21,464.00
單位
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 445g
RS庫存編號 700-7275
製造零件編號MHF2-12D1
BrandSMC
TWD19,451.00
單位
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 190g
RS庫存編號 478-056
製造零件編號MHY2-16D2
BrandSMC
TWD10,662.00
單位
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g
RS庫存編號 841-2375
製造零件編號MHZ2-10S
BrandSMC
TWD12,202.00
單位
MHZ Single 2 Parallel 0.35 → 0.7 MPa 0.7MPa Not Cushioned M3 x 0.5 55g
RS庫存編號 366-3626
製造零件編號MHZ2-25DN
BrandSMC
TWD16,735.00
單位
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 430g
RS庫存編號 700-7332
製造零件編號MHY2-25D
BrandSMC
TWD14,415.00
單位
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 560g
RS庫存編號 700-7279
製造零件編號MHF2-16D
BrandSMC
TWD20,314.00
單位
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 350g
RS庫存編號 700-7323
製造零件編號MHS3-40D
BrandSMC
TWD16,446.00
單位
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 351g
RS庫存編號 768-1625
製造零件編號MHZL2-25D
BrandSMC
TWD19,195.00
單位
MHZL2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 470g
RS庫存編號 700-7345
製造零件編號MHZ2-16D
BrandSMC
TWD12,426.00
單位
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g